The 411 on The Align Nitro 50 Size Heli

This is the T-Rex 600 Nitro Pro RC helicopter from Align. This helicopter features a beautiful factory painted fiberglass canopy. The canopy also features a rigid easy clip on/off design for fast installation and removal. The simple and light weight design provides awesome flight performance just like larger helicopters while still maintaining very stable hovering and flight. +/-14 degree collective pitch is for extreme 3D performance. The clutch, fan and bell assembly provides smooth operation even at high RPM's.

The forward mounted tail servo helps to keep exhaust oil from entering servo, and also improves the helis CG. Pitch and all servos moved forward for CG.

The battery tray is designed for easy and clean radio gear installation. With the 440cc fuel tank capacity, this allows for about 10 minutes of 3D flying.

Heavy duty tail with thrust bearings, and 95mm tail blades. The Torque Tube driven tail for incredible 50-size performance and a rigid frame design that can also handle hard crashes without damage. Super engine cooling system features a large diameter fan and very efficient airflow to provide unequaled cooling and horsepower. Clutch/Start shaft features a 10mm ID one way bearing to eliminate any bearing problems during starting and flight. Ready to fly weight (no fuel) is an incredibly light 3.20Kg (7lbs). The fuel tank is designed so that no additional header tank is required.

Features:

Main Gear Radio 8.5:1, 1500-2200 Rotor RPM
Carbon Fiber frames, fins and boom supports
+/-14° collective pitch is possible for extreme 3D performance
Pitch and All servos moved forward for CG
Battery tray designed for easy and clean radio gear installation
95mm Tail Blades
Torque Tube driven tail for incredible 50 sized performance
Ready to fly weight (no fuel) is an incredible 3.20Kg (7lbs)
New main gear with one-way bearing design for high torque
New flybar paddles feature light weight and sports
New flybar control set design
New tail boom supports

Specifications:
Length: 1160mm
Height: 410mm
Main blade length: 600mm
Main rotor diameter: 1350mm
Tail rotor: 240mm
Engine pinion gear: 20T
Main drive gear ratio: 8.1:1:4.5 (E:M:T)
Autorotation tail drive gear: 180T
Tail drive gear: 40T
Flying Weight: Approx 3200g

Included Accessories:
T-REX 600 Nitro Pro Kit, set w/o main blade
Painted Fiberglass canopy
Fuel Tube
Fuel filter
New fuel tube clips
New landing skid

Items required to complete:
Transmitter (6 channel or more, helicopter)
Receiver (6 channel or more)
Standard servos (x4)
Heading lock gyro and tail servo
600mm Main Rotor Blades
.50 Engine and muffler
Engine starter and starter shaft
Fuel Pump
Engine fuel
 

Traxxas Rustler VXL RTR 70+mph top spped on 8000mAh 3S Lipo Velineon Extreme Brushless Power System Traxxas High Current connector Velineon 3500 brushless motor Velineon VXL-3s fed/rev/brake ESC New low-profile, aggressive body with bolt-on wing Precision high-torque digital steering servo steel internal transmission gears New front steering spindles and rear hubswith 5x11 mm rubber-sealed ball bearings Precision metric hex hardware Pre-glued Alias 2.8" step-pin rear and ribbed front tires Sinister black-chrome All-Star 2.8" wheels.